1. Home
  2. Knowledge Base
  3. FAQ
  4. What does a “Communication error” alarm mean?
  1. Home
  2. Knowledge Base
  3. Products
  4. Controls
  5. What does a “Communication error” alarm mean?
  1. Home
  2. Knowledge Base
  3. Support
  4. What does a “Communication error” alarm mean?
  1. Home
  2. Knowledge Base
  3. How-to's
  4. What does a “Communication error” alarm mean?

What does a “Communication error” alarm mean?

A communication error means your Messana controller (the mBox) can’t talk to one of the devices in your system. For example, this could be a room sensor, the heat pump or an air treatment unit. The device may be working fine, but the mBox isn’t getting its data.

In most cases, the cause is simple. The device has lost power, or a cable has come loose. This article explains what you can check, step by step.

Which devices can show a communication error?

Any device that talks to the mBox can show a communication error. This includes room sensors, heat pumps and other heating and cooling sources (H/C Sources), air treatment units (ATUs), fan coils, pumps and mZones. The alarm isn’t about whether the device itself works. It means the device and the mBox can no longer share information.

The mBox relies on this link to run your system. It reads data from sensors, such as the room temperature, and sends commands to equipment, such as the heat pump. When a device stops answering, the mBox loses that information or can’t control the device. For example, a room whose sensor has a communication error can’t ask for heating or cooling. If an mZone loses its link.

How do I fix a communication error?

Follow these steps in order. Most communication errors are solved by the first two.

  1. Check the power to the device showing the error. Make sure the device is switched on and its breaker hasn’t tripped. Many devices have a display or a light that shows they’re on.
  2. Make sure every mBox and mZone has power. Each one has a green POWER light, which should be on. If an mZone loses power, every sensor and zone connected to it can show an error. So, fix this first. To learn what the lights mean, see What do the LEDs on the I/O controller indicate?
  3. Check the communication wire connection. Look for a cable that is loose, unplugged or damaged between the device and the mBox or mZone. For sensors connected by network cable, also check the cable and the network switch.
  4. Check the device for its own alarms. Some devices, such as an air treatment unit (ATU) or a heat pump, have their own display or controller. Look there for an alarm or error code. While the communication error is active, check the device itself for any alarms.

Once the mBox hears from the device again, the alarm clears by itself. You don’t need to reset anything.

Safety first: don’t open electrical panels or the inside of any unit that is connected to power. 

Several devices show a communication error at once?

Do many sensors or zones show the alarm at the same time? Then the problem could be the mZone or mBox they’re connected to. In that case, check the power and the connections of that module first. When it’s back online, the other alarms should clear on their own.

When should I contact your installer?

Contact your installer if:

  • The device has power, the cables look fine, and the alarm doesn’t clear.
  • The alarm keeps coming back.
  • The device itself shows an alarm or error code.
  • The alarm appeared after new work on your system, such as a replaced device.

Still having trouble?

If the communication error still doesn’t clear after these steps, please open a support case. To help us assist you quickly, include:
  • The name of your system and the device showing the alarm
  • When the alarm started, and whether it comes and goes
  • What you’ve already checked (power, mBox and mZone lights, cables)
  • A screenshot of the alarm in the App, and a photo of any error code on the device itself

You may also be interested in:

Was this article helpful?

Related Articles

Please wait

Your form is being submitted, don’t close your browser.